Please note these mushroom valves and washers are only suitable for use in the Propulse G5 Unit with a black lid and the 2017 model with purple lid.

Replacing the Mushroom Valve & Washer

The Mushroom Valve is specifically designed to prevent water flowing out of the reservoir whilst filling. Should a replacement Mushroom Valve or Washer be required, please follow the steps below:

Remove the reservoir from the Propulse®
Remove the old Mushroom Valve from the reservoir and discard
Insert a new Mushroom Valve into the reservoir
Remove the rubber Washer from the underside of the tank plug hole and discard
Insert a new rubber Washer into the lip on the underside of the tank plug hole
Return the reservoir to the machine
N.B.

When the mushroom valve is fitted correctly, it should lift slightly with the tension of your finger, when pressed.
Be careful when changing the valves and washers, as any damage to either will cause the tank to leak.
Be sure to check the valves and washers prior to each use, as they do wear through normal use and may need changing – this will help prevent possible damage to the water inlet valve.

Mirage Health Group Code KIT5100